friction welding
英 [ˈfrɪkʃn ˈweldɪŋ]
美 [ˈfrɪkʃn ˈweldɪŋ]
摩擦焊接
双语例句
- It is difficult to perform the friction welding for the thick-wall pipe drilling tool.
针对厚壁管钻具难以进行摩擦焊接的现状，研制了一种厚壁管钻具窄间隙焊接专用机。 - It has vanguard technology of friction welding and chroming and so on.
具磨擦焊接和镀铬等先进生产工艺。 - Representatives will be available to demonstrate& discuss the friction welding process.
我们的销售代表可随时与您探讨您对摩擦焊接工艺的需求。 - The thermal cycle on the surface of friction welding joint was measured by means of thermocouples.
结果表明，摩擦焊接头的温度场、飞边形状和轴向缩短量的计算结果和实验结果吻合较好。 - Joining of Al-Al Micron Foils by Ultrasonic Friction Welding
微米厚Al-Al薄膜的超声摩擦焊接技术 - A new welding process, the transient liquid phase ( TLP) bonding, is applied to joint drill pipes in order to overcome the shortcomings of the friction welding.
针对石油钻杆摩擦焊中存在的缺陷，研究了钻杆瞬时液相扩散焊技术。 - According to a series of linear friction welding test for TC4 alloy, the morphology, distribution of oxide in welded joint and the joint microstructure under certain condition were observed.
进行了TC4线性摩擦焊焊接试验，观察了一定焊接条件下，TC4钛合金线性摩擦焊接头氧化物组织的形态、组成、分布特点及组织特征。 - Study of the automatic loading and unloading system for the friction welding of drilling rod
钻杆摩擦焊接自动上下料系统的研究 - The linear friction welding ( LFW) experiment of the dissimilar titanium alloys ( TC4+ TC17) was carried out with homemade LFW machine.
论述了TC4+TC17异种钛合金试件的线性摩擦焊试验过程，分析了焊接接头的微观组织和力学性能。 - Friction welding is a highly efficient, energy-saving and with environmental protection solid-phase welding technology. Currently, friction welding has been widely used in manufacturing industry.
摩擦焊接是一种高效、节能、环保的固相焊接技术，当前摩擦焊接已经广泛用于制造业。 - The friction welding machine to use the numerical control system is also to be possible to realize the complex components pinpointing welding request.
摩擦焊机采用数控系统还可实现复杂零件精确定位的焊接要求。 - The test process of linear friction welding of GH4169 superalloy was discussed.
论述了高温合金GH4169线性摩擦焊的试验过程。 - MTI is a world leading manufacturer of inertia and direct-drive friction welding equipment.
美国MTI是一家生产惯性焊接机和直接驱动摩擦焊接机的世界知名厂家。 - Research on the Closed-loop Electro Hydraulic Proportional Control System of Friction Welding Machine
摩擦焊机电液比例闭环控制系统的研究 - In order to improve the shock toughness of friction welding joint of oil drilling pipe, spray quenching is used as the measure of heat treatment after friction welding.
为研究锻件喷雾淬火冷却过程，研制了喷雾淬火热处理装置，并对轴类件进行喷雾淬火热处理试验。 - Welding fabricated by means of friction welding could achieve reliable solder joints.
焊接制作采用摩擦焊接的方式实现可靠焊接。 - New Technology of Solidoid Jointing Stir Friction Welding
固相连接新技术&搅拌摩擦焊技术 - MTI is the world's only supplier of large turnkey machines providing custom engineered solutions through a full range of friction welding technologies and equipment.
MTI公司是全球唯一的大型摩擦焊机成套交钥匙供货商，能够提供按客户要求设计的全系列摩擦焊接技术和设备。 - Correlations of Friction Powder, Interfacial Temperature and Interface Shear Strength During Ti-17 Linear Friction Welding
Ti-17线性摩擦焊摩擦功率、界面温度及剪切强度之间的关系 - Dynamical simulation on the pressure response of load system of linear friction welding machine
线性摩擦焊机施力系统压力响应动态仿真 - Inertia friction welding techniques is used to weld superalloy GH4169.Joint microstructure and property are analyzed by way of metallography, SEM EDS, and hardness analyzing methods.
采用惯性摩擦焊方法进行了GH4169高温合金的焊接，用金相显微镜、，扫描电镜下EDS分析和硬度试验等方法分析了接头组织和性能。 - MTI is the only manufacturer of friction welding equipment to offer direct drive, inertia, linear, stir, and radial friction welding processes and resistance welding.
MTI是全球唯一能够提供多种摩擦焊接设备，包括直接，惯性驱动，线性，搅拌和径向摩擦焊接，以及电阻焊接设备的公司。 - The principle of measuring normal deformation of the surface of friction welding joint is analyzed.
分分析了测量摩擦焊接头表面法向变形的原理。 - The characteristic analysis method as well as a fuzzy analysis method are carried out to classify the friction welding defects effectively.
进而运用特征参量分析方法和模糊分析方法，准确有效地对摩擦焊缺陷进行识别和分类。 - The physical phenomena of copper and stainless steel in the process of friction welding joint forming were recorded and observed by the method of interrupting the test.
本文采用中断试验方法，记录和观察了铜与不锈钢在摩擦焊接头形成过程中的物理现象。 - Friction Welding and Heat Treatment for Geological Drill Rod
地质钻杆的摩擦焊接和热处理 - The research results will be useful to the study of weld forming mechanism of dissimilar material friction welding.
在接头形成过程中经历了两次摩擦面的转移.其内容对促进异种材料摩擦焊的接头形成机理研究有积极的作用。 - Through comprehensive analysis, it is concluded that friction welding technology parameters were derived the optimization continuously.
通过综合分析，得出了优化的连续驱动摩擦焊工艺参数。